IMG-LOGO
SEMCOTECH

Waste Water Products

MDS 5 - S / MDS 5 - D

The MDS 5 - S - Station Manager (MDS 5 - S) facilitates measuring, saving and processing analogous and digital signals in the field of environmental measurement engineering.

Due to its compact construction the MDS 5 - S can be installed directly on a top-hat rail in the electric cabinet – without any furher time-consuming mechanical renovation..

The integrated lithium battery allows operation autonomy and portability – wherever you need it, without any external power supply!

Handling and controlling of functions and measured values is possible via an integrated keypad and a LCD-display.

For means of long-distance data transmission, a GSM / GPRS modem (e.g. the MDS 5 - C - Modem ) can be connected directly. This makes a secure and economic data transfer to the online platform WASDatenportal possible. Additionally, the MDS 5 - S can be used in combination with the GPRS / GSM modem as a controller for fault messages; warning notices in the case of limit value violations can be transmitted via short message or fax. Furthermore, the programmes WBedien (software for operating the system and reading out data) and FileInspector (analysis software) are at your disposal.

MDS 5 - C

The compact MDS 5 - C data logger facilitates measuring, saving and processing analogous and digital signals in the field of environmental measurement engineering.

The integrated lithium battery allows operation autonomy and portability – wherever you need it, without any external power supply!

For means of long-distance data transmission, a GSM / GPRS modem (e.g. the MDS 5 - C - Modem) can be connected directly. This makes a secure and economic data transfer to the online platform WASDatenportal possible.

Furthermore, the programmes WBedien (software for operating the system and reading out data) and FileInspector (analysis software) are at your disposal.

MDS 5 - C - Modem

The GSM / GPRS modem (Quadband) can be linked directly to the W.A.S. data collection systems MDS 5 - S - Station Manager and MDS 5 - D - Flow Manager as well as to the MDS 5 - C - Datalogger . Thus, a secure and economic data transfer to the online platform WASDatenportal is ensured. Alternatively, the data can also be pusehd to a FTP-server.

Electro Magnetic flow meters

Induction flow meters are intended for industrial measurements of electrically conductive liquids in different fields of industry. Induction flow meters meet most demanding requirements on accuracy, reliability and long-term stability of measurements. Liquid flow rate measurements in both directions of flow are possible.

The liquid flow is measured in a contactless manner; the flow meter has no moving mechanical parts and the hydrodynamic conditions at the measurement location in the pipe are absolutely unaffected.

Pressure probe DS(T) 22

Capacitive, ceramic, relative-pressure sensor for precise water level measurement in ground and surface water.

Robust and slim design (22 mm diameter) made of stainless steel 1.4404 (standard), 1.4539 (optional).

High measuring accuracy (0.05% FS) and long-term stability (0.1%/year).

Wide availability of measuring ranges (0-2 /1 /4 /5 /20 /40 /100 /200/250 /300 m).

Optional: digital (RS485, SHWP/MODBUS), analog output (0 / 4-20 mA with extended ESD protection according to IEC 61000-4 part 5, 0-1 V) or SDI-12.

Integrated temperature sensor (type DST 22).

TLG - Depth-sounding device

Portable hand-held device for determining the water level and for depth sounding up to 200 m .

Fine mechanical, fully automatic measurement procedures.

Mechanical counter to display the groundwater level in m and cm.

Light weight and compact design.